9-21W25-42V can pull current 700/750/800/850/900/950/1000/1050mA
Learn more9-21W25-42V can pull current 350/400/·450/500mA·No RF interference
Learn more1. DALI gateway controller conforming to F2 protocol; 2. Fully control 64 DALI drivers and customize the scene; 3, with 16 independent partition, can be partitioned group dimming control; 4. Each area can set 16 scenes, and the running time of the scenes can be customized; 5, Each light path can be customized, high limit; 6. The equipment restarts to restore the circuit state before power failure; 7, With DALI power supply, and RS485 isolation; 8, Support color temperature control, can directly set the color temperature value or relative adjustment color temperature; 9, Can read the current color temperature value; 10, Support scene control color temperature; 11. Bus short circuit protection; 12, Support Eide online upgrade.
Learn more1, Support switch, linear, quadratic, inverse S four dimming curve; 2, With AI-bus ㅤ485 interface, can communicate with Eide 485 products and control; 3, With programming buttons, MAC programming, restore factory Settings and other functions, and LED indicating different states; 4, With 6 MOS dimming output; 5, Overtemperature protection function; 6, With output short circuit protection function
Learn more1, Support switch, linear, quadratic, inverse S four dimming curve; 2, With AI-BUS 485 interface, can communicate with F2 485 products and control; 3, With programming buttons, MAC programming, restore factory Settings and other functions, and LED indicating different states; 4, With 4 MOS dimming output; 5, Overtemperature protection function; 6, With output short circuit protection function.
Learn more1. It has 6 channels of 20A relay output unit and 6 channels of 0-10V control signal output; 2. Each loop can be switched manually; 3. With LED lights to display the switch status of each circuit; 4. Suitable for dimming control of fluorescent lamp and LED lamp.
Learn more1. It has 6 channels of 10A relay output unit and 6 channels of 0-10V control signal output; 2. Each loop can be switched manually; 3. With LED lights to display the switch status of each circuit; 4. Suitable for dimming control of fluorescent lamp and LED lamp.
Learn more1. With 8 10A relay output units; 2. Each loop can be switched manually; 3. With LED lights to display the switch status of each circuit; 4. Each circuit can set relay closing delay and relay interval protection time; 5. Each loop is equipped with current detection to protect the load.
Learn more